Pages

Saturday, November 21, 2020

Shoes for Miss Piggy

I haven't been posting in this blog for a long time, but I'll try to continue now, like I'm continuing the Crafts blog. I haven't been making many doll shoes while I've been gone, but there are a couple of projects I've done since the last post that was actually about making doll shoes. I'll start with those before starting any new projects.


The first project is from 2017, shoes for the 16" Miss Piggy. These have resin cast soles, leather insoles, fabric uppers and foam clay on top of the fabric. The foam clay was a bit tricky to get to cover the fabric entirely as it didn't stick to the fabric properly.



I did my best, but there was no way to get the edges even. These were planned to be a closed toe design, although they look like sandals in the previous picture. The idea with this was that the toe part is much easier to shape when it's entirely made of the modeling clay. The only part that really needed additional support was the part going over the foot.



I used glitter glue for the edges where the resin sole was showing through a bit.



The result was neater this way, and the glue also makes sure the clay does not come loose on the edges.



Here are the shoes on Miss Piggy's feet.



I have been tempted to try making shoes that are entirely made of modeling clay, but I always have a hard time making two identical pieces of anything without using molds, so that problem needs to be sorted first, if I want to do it.

No comments:

Post a Comment