Experiment with metal foil

This is going to be a long post. I decided to try something new and wasn't sure how it would turn out. I ended up fixing things a few times when everything didn't go quite as planned.

To start with, I made a pattern for the soles (the doll is the 16" Miss Piggy). Then I cut the soles out of metal sheet (0.3 mm thickness, cut with shears) and bent them to follow the bottoms of the doll's feet.

The other parts of the soles were resin castings I had made earlier. A pair of platforms and heels.

I used hot glue to attach the platform parts to the metal soles. At this point I realized the sides would need something to cover them and make them more even. The resin castings were made using a latex mold, so they had some bumps.

I had this thick and stiff leather that hadn't been useful for anything else, but I thought it would make an even surface for the sides and undersides of the soles. So I cut suitable pieces and glued them on the soles. Again, using hot glue. Actually, everything that required glue in this project was done with hot glue. The new hot glue gun is so handy.

Then I glued the heels in place. These soles were to be covered with metal foil all over, so all pieces needed to be in place before starting that.

The metal foil came from chocolate wrappers. It seems that those all have the inside covered with paper nowadays. Probably some food safety issue. Anyway, the paper had to go before the foil would be usable for two reasons: 1) the foil was too stiff, and 2) the foil had some text embossed into it and that had to go. So, I soaked the foils in water overnight to soften the paper.

When the paper was all soaked and soft, I used my thumbnail to scrape it off. That was slow and tedious work, and the paper started to dry after a while, so I had to put the foil back to water occasionally.

It was impossible to remove all traces of paper, but I got off enough of it for the foil to be usable. I also thought that the glue would probably take better with some traces of paper still left on the foil.

Then I glued the foil on the soles. Unfortunately, even with the leather, the surface was very uneven.

I had been hoping to have the foil to be the finished surface, but it just didn't look that nice. So I decided that I had to do something else with these. But first, I cut insoles out of gold-colored leather and glued them in place. I usually use a neutral light color, but I thought this fit the soles well.

I decided to use this gold-colored decorative plastic band for the straps and cover as much of the sides as possible with it to draw attention away from all the unevenness of the foil surface.

Here are the shoes with the straps glued in place. After this I glued some strings of those decorations to the sides of the heels. I also glued pieces of leather under the heels and platform parts to make the soles even and help keep the shoes upright when they are not on the doll's feet.

Finally, here are some photos of the finished shoes on Miss Piggy.

Sandals using hot glue

I have been practicing with hot glue, and the Kindi Kids doll I have is perfect for this. The proportions of the doll are so off that it doesn't matter, if the shoes look a bit clumsy.

I'm also practicing with some new materials. The first of those is the black foam I used for the soles of these shoes. It's from an old mousepad. I just removed the fabric covering of the mousepad, and the material was easy to cut with scissors. It's soft, but still sturdy as the mouse pad was 0.5 cm thick.

As usual, I started by tracing the doll's foot on paper and then shaping the sole around that. Then I cut the soles from the mousepad.

For straps, I used this Christmas decoration material. It resembles the material I used for the stiletto heels, but it's not as stiff as that was. I expect to be making several pairs of shoes while experimenting with this material as there's 2 meters of it in the roll.

Here are the main parts of the shoes. On the left, the ends of the straps are cut in a way that they can be placed slightly slanted on the sides of the soles. At this point, the straps are a bit too long as it is better to leave some extra and trim that away while checking how the other end should be glued.

I used hot glue for every part of the assembly. Here the blue headed pin marks the place for the front edge of the strap.

I first glued one end and then checked with the doll how long the straps should be and where the other ends need to be glued.

After gluing the other ends in place, I glued vertical pieces behind the heels for attaching ankle straps. I also glued some of the red material on the edges of the soles where they remained bare.

The ankle straps are made of three thin rubber bands. I glued the ends inside the heel part, because that was the only place to hide them. Another option would have been to make a knot and let it show on the outside or cover it with some decoration.

Here are the finished shoes. The soles could have been shorter, and maybe the strap should have had only three rows to show the toes, but these are good enough for a first try with new materials, new kind of glue and new type of doll.

Variation of the stiletto heels

These shoes are made with similar resin soles as the red stiletto heels. The previous post shows the painting stage. I wanted different heels for these, but ended up using the same structure underneath. I don't remember what kind of glue I used for the red pair, but this time I used hot glue to secure the wooden sticks in place.

I painted the heels black, and while the paint was drying, I thought about different ways of using the plastic material also in the heels in addition to using it for the straps. I ended up with the structure below in which the bottom pieces are first glued in place around the heel and then the upper part.

Here are the finished shoes. The plastic parts of the heel are glued in place using hot glue, while the straps over the toe part are sewn in the similar way as in the red shoes.